The dimensions of these C.O.B Plasma halo rings are for Kawasaki Z1000 2010-2015.
'Demon eyes halo', 'Angel eyes halo' & 'halo headlights' are all names for
the same product. About a decade ago, when companies started installing
"aftermarket halo rings" into sportbike’s headlamps, people liked the
look so much that Sportbike businesses began to sell aftermarket halo headlight
conversion kits. When this headlight style started gaining popularity, people
started calling them by numerous terms, but they all refer to the same product
halos were made from clear acrylic or lexan cut into a ring with hashes around
the edge. The ring would illuminate with a single LED bulb. The light would travel through the acrylic and
reflect off the hash marks causing a glow effect, much like the glow of an
angel’s halo. Later on they were made of CCFL halos; witch was a phosphorescent
light with a little gap in between. Then, they upgrade to the LED halos: these
lights were brighter but still have some gap in between the LED’s lights. Now,
we have the new generation of LED Plasma halos. These rings last longer, are
brighter and do not have a gap in between the lights.
Different names for the C.O.B halos: Other names for these style L.E.D Plasma halos
are; Hyper L.E.D Plazma halos, or COB LED halos.
This kit includes
- C.O.B is an
acronym for “Circuit On Board.”
- The Circuit
board is 2mm thick
The advantage of the COB lighting compared with traditional halo lights, is less
power consumption, greater reliability, greater illumination, they last longer,
and there is not gap in between the LED lights.
- The solid light display gives a better look with the headlight assembly illuminated
- COB halos
are available in the following color options: red, blue, white, and green.
year manufacturer limited Warranty. This warranty covers if the LED halo rings
or if the transformer stops working for no reason. The warranty does not cover
if you break the ring or water damage.
- Installation Instruction and diagram.
- Two C.O.B Plasma Halo rings of the color of your choice
- One transformer box (The inverter box also called
ballast for each COB halos is 12V DC).
- Hardware necessary for installation.
- This installation requires you to heat and open the
headlight lamps in order to install this product. You can either use an
oven or heat gun to open headlight lamp.
- This product requires a silicone adhesive type
application, therefore there is no return or exchange once it is installed
- We highly recommend professional installation for this
This sale is for C.O.B Plasma halo rings only, and the necessary hardware to
installed it. This sale is Not for
the whole headlight assembly.